-
- Electricity
6-Volt Lamp Boards
- Terminals on these lamp boards let you connect lamps in series or parallel. Lamp board features removable shunt wires that allow for quick changing from parallel to series or any combinations of the two. All units have plastic bases with rubber feet. Small incandescent bulbs included. Available in three or five-socket sizes.
- ADD
-
- Battery Holders, Electricity
AA Cell Battery Holder
- AA cell battery holder with 6" connector cords in red and black. Made of unbreakable plastic. Curved sides help prevent the battery from falling out when it is upside down. Ages 7+
- ADD
-
- Electricity
Alligator Cards, 1″ Clips W/ Sheaths
- Excellent for all types of low voltage experiments, these 24g connector cord feature 1" sheathed alligator clips on each end. Sold in packs of 10 (2 each of white, yellow, black, red, and green). Ages 7+ Each set includes 10 connector cords.
- ADD
-
- Electricity
Alligator Clip/Banana Plug Cords
- Flexible, Plastic covered with alligator clip on one end and banana plug on the other.
- ADD
-
- Meters
Ammeter, Moving Coil
- For D. C. measurements, any single range, 0-1, 1.5, 3, 5, 10 Amp.
- ADD
-
- Meters
Ammeter, Moving Coil, Single Range, MS-100
- General purpose student bench meters with full-scale accuracy of ±2.5% and overload protection. Features include large 3" scales, external zero-adjust calibration, and fully enclosed plastic cases with inclined meter faces.
- ADD
-
- Battery Holders, Electricity
C Cell Battery Holder
- C cell battery holder with 6" connector cords in red and black. Made of unbreakable plastic. Curved sides help prevent the battery from falling out when it is upside down. Ages 7+
- ADD
-
- Battery Holders, Electricity
Cell Holder, Double (D Battery)
- Supertek double cell holder is a high quality easy to load and easy to remove cell holder for holding two standard D size batteries. It is fitted on the sturdy plastic base. 4mm sockets are provided for the input signals separately with each cell holder. Double cell holder can be used as a single cell holder by using only one…
- ADD
-
- Battery Holders, Electricity
Cell Holder, Single (D Battery)
- Supertek single cell holder is a high quality easy to load and easy to remove the standard D-size battery. It is fitted on a sturdy plastic base. 4mm sockets are provided for the output. Two or more cell holders can be used for parallel or series combinations. Supplied without battery. Size: 7.09" L x 4.13" W x 3.35" H Grades…
- ADD
-
- Electricity
Contact Key, Single
- Contact key with a spring arm, press knob, contact stud, and a connecting strip with two 4 mm terminals, on a plastic base of size 110 x 50 mm.
- ADD
-
- Battery Holders, Electricity
D cell battery holder with fahnstock clips
- D cell battery holder with Fahnestock clips for easy connection. Made of unbreakable plastic. Curved sides help prevent the battery from falling out when it is upside down. Ages 7+
- ADD
-
- Battery Holders, Electricity
D Cell Battery Holder with leads
- D cell battery holder with 6" connector cords in red and black. Made of unbreakable plastic. Curved sides help prevent the battery from falling out when it is upside down. Ages 7+
- ADD
-
- Electricity
D Cell Battery Holder/Joiner
- Single D cell battery holder can be snapped together in parallel or series to extend capacity or voltage. Ages 7+.
- ADD
-
- Electricity
DC Generator
- This handheld D.C generator is an excellent alternative to more expensive models. It is an ideal tool for demonstrating this transformation of mechanical energy into electrical energy. This unit produces a terminal voltage of 6.3V and a maximum current output of 1.2A. Comes with two 15" leads. Ages 7+
- ADD
-
- Electricity
DC Motor Kit
- A simple kit for students to gain insight into field poles, armatures and switches, Kit includes one mounting base, field pole, armature, two wire brushes, a piece of copper wire, two shaft supports, a AA battery holder, AA battery, and 4 each of screws and nuts. With assembly instructions.
- ADD
-
- Electricity
Decade Resistance Box
- Consists of six rotary switches in decade sequence mounted on a metal panel with each value clearly marked. From 0 to 1, 111, 110 x 1 ohm, Accuracy within + 0.5% Two universal binding posts are provided for easy connection.
- ADD
-
- Meters
Demonstration Meter
- With interchangeable scales. A versatile instrument and demonstration meter that can be converted to an A.C., or D. C. voltmeter or ammeter with the selection of various ranges for each mode. With a high-quality moving coil, spring-controlled movement with full-scale deflection of 5 mA or 100 mV D. C. The long pointer has a spade end and is visible from…
- ADD
-
- Meters
Dials, Interchangeable
- For use with demonstration meter. Each dial comprises a plastic panel with a sealed moulded capsule on one side containing appropriate shunts or voltage multipliers.
- ADD
-
- Electricity
Economy Mini Lamp Holder and Switch
- Lamp Holder and switch for low voltage experiments. 1.75" diameter plastic base. Ages 7+
- ADD
-
- Electricity
Electric Buzzer
- An Essential Electrical part for use in physics, Electrical circuits, Sound experiments, and other general lab use. Strong plastic construction. The voltage requirement is 3 DC volts. Includes a 7/8" buzzer on a base with two holes for mounting and 3" L Connecting wires. Ages 7+
- ADD
-
- Electricity
Fundamentals of Electronics
- To ex plain bas ic concepts of electronics. High quality solder less breadboard Easy to build and learn Symbolic representation of components Color coding chart to read resistor values This Kit introduces students to Ohm's Law, resistors, capacitors, semiconductors and transistors. T his kit includes a breadboard on base, LEDs (Red and Green), capacitors, resistors, switches buzzer, transistors (NPN and…
- ADD
-
- Meters
Galvanometer, Moving Coil
- For D. C. measurements, Scale 35-0-35 or 50-0-50.
- ADD
-
- Meters
Galvanometer, Moving Coil, Single Range, MS-100
- General purpose student bench meters with full-scale accuracy of ±2.5% and overload protection. Additional features: large 3" scale, external zero-adjust calibration, and fully enclosed plastic case with inclined meter face. -500-0-500 µA (20 µA).
- ADD